Hollyland Mars 400 Wireless Video Transmission Dual HDMI
JPC
  jpc@jpckemang.com   021-7180487
 

Wireless Transmission System

Hollyland Mars 400 Wireless Video Transmission Dual HDMI

Rp 6.999.000   Rp 6.499.000 Warranty: Garansi Resmi 1 Tahun
Promo :
  • Promo Hollyland Rp. 500.000

Periode :
2 - 31 Mei 2020

Specification :

  • 400ft Transmission Range
  • Less than 0.1s Latency
  • HDMI Input & HDMI Loop Out, Dual HDMI Output
  • Mounting Batteries for Both the Transmitter and Receiver
  • 6~16V DC Power Input
  • 1 Transmitter with Multiple Receivers
  • Smart Terminal Monitoring
  • Smart Channel Selecting
  • USB Firmware Upgrade
  • OLED Display
  • Stable & Reliable Industrial Metal Case




Ingin cicilan 0% ? Silahkan klik :

lazada.co.id tokopedia.com blibli.com shoope.co.id bukalapak.com jd.id elevania.com


The Mars 400 from Hollyland is an entry-level 1080p60 transmitter/receiver system featuring a 400' line-of-sight transmission range. In a compact design, the transmitter offers an HDMI input and HDMI loop output, and the receiver has two HDMI outputs, allowing you to connect to up to two displays.

Additionally, an optional second receiver can be linked up to the transmitter to accept the signal at the same time. The transmitter is also capable of sending the signal over built-in Wi-Fi to up to four mobile devices, whether it is also sending to a receiver at the time or not. This will allow different people/departments on the set to view the image being captured. The image is sent to the HollyView app, which is compatible with iOS and Android.

Both the transmitter and receiver have a built-in L-series battery plate and also support DC power. Batteries are sold separately. One power adapter is included to get you started on the receiver end. Both units also have an OLED display that confirms the resolution, transmission channel, signal strength, and other details. The display also shows a low-battery warning when there are about 30 minutes of runtime left.

One of the features of the Mars 400 system is a channel scan function. Via the OLED display, you can see the status of each selectable transmission channel in the environment you're in. This feature lets you know which channels are good and which have interference. Another feature is scene mode selection, which allows you to select from three different scene modes as best suits your environment. The three modes let you prioritize between video quality, low latency, or a balance between the two.

The transmitter and receiver are each under 4.5 x 2.5" and have a robust yet lightweight metal housing.

Key Features

  • Entry-level 1080p60 transmitter/receiver system
  • 400' line-of-sight transmission
  • HDMI input and HDMI loop output
  • Dual HDMI outputs
  • Up to two receivers supported at the same time
  • Wi-Fi transmission to up to four mobile devices using iOS/Android HollyView app
  • Built-in L-series battery plates
  • OLED display
  • Low-battery warning
  • Channel scan function
  • Scene mode selection

Hollyland Mars 400 Specs

Wireless
Wireless Range400' / 121.92 m (Line-of-Sight)
Channel Bandwidth20 MHz
Frequency Range5 GHz
Latency< 0.1 sec
RF Power≤ 21 dBm
RF Sensitivity-80 dBm
Wi-FiYes
Interfaces
Transmitter Antenna Ports2 x RP-SMA Male
Receiver Antenna Ports2 x RP-SMA Male
Transmitter Video Connectors1 x HDMI Input
1 x HDMI Loop Output
Receiver Video Connectors2 x HDMI Output
Transmitter Other I/O1 x USB Type-C
Receiver Other I/O1 x USB Type-C
Embedded AudioHDMI
Format Support
Video FormatHDMI:
1080p at 30, 50, 60 fps
1080i at 50, 60 fps
720p at 50, 60 fps
576p at 50 fps
480p at 60 fps
Display
Transmitter Panel TypeOLED
Receiver Panel TypeOLED
Power
Transmitter Battery Support1 x Sony L-Series / NP-F Type
Receiver Battery Support1 x Sony L-Series / NP-F Type
Transmitter Power Connector1 x Barrel (6 to 16 VDC) Input
Receiver Power Connector1 x Barrel (6 to 16 VDC) Input
Transmitter Power ConsumptionDevice: (10 W)
Receiver Power ConsumptionDevice: (6 W)
General
Transmitter Mounting1 x 1/4"-20 Female
Receiver Mounting1 x 1/4"-20 Female
MaterialsMetal
Transmitter Dimensions4.33 x 2.44 x 1.1" / 11 x 6.2 x 2.8 cm
Receiver Dimensions4.33 x 2.44 x 1.1" / 11 x 6.2 x 2.8 cm
Transmitter Weight0.4 lb / 165 g
Receiver Weight0.4 lb / 165 g
Packaging Info
Package Weight1.72 lb
Box Dimensions (LxWxH)7.2 x 5.6 x 3"
NEW REVIEWS

Related Products and Accessories