Specification
General
Name
Feiyu SCORP 3-Axis Camera Handheld Stabilizer
Demensions
314.4*210.7*240.3mm(Gimbal balancing position)
280.8*263.6*68.1mm (Gimbal folded position)
Weight
About 1200g/2.65 lb (including quick release plate, not included other accessories and camera)
Material of Main Body
Synthetic macromolecular resin,Alumninum Alloys
Payload
About 2.5kg/5.51 lb (well balanced)
Water Proof
Splash-proof
Gimbal
Stabilization
3-axis Motor
Controllable Range
Tilt:+110°~-45°
Roll:+20°~-20°
Pan:360°(Unlimited)
Rotatable Range
Tilt: 340°(With limitation)
Roll: 340°(With limitation)
Pan: 360°(Unlimited)
Extended Ports
At the bottom of the handle:
1/4 inch thread hole*1, which can mount Tripod; Below the multifunction knob: Type-C charging port*1;
In front of fixed plate:
Type-C extension port*2 to connect focus motors;
At the back of fixed plate:
Type-C camera control port*1, Type-C image transmission port*1;
In front of quick release plate:
1/4 inch thread hole*1, for installation of lens holder;
On the top of vertical cross arm:
1/4 inch thread hole*1, for installation of ARRI rosettes adaptor?
Battery
Type
Lithium Cell
Capacity
2500mAh, built-in battery cannot be removed, charge it via the USB-C port
Theoretical Battery Life
13h
Operating Voltage
6.8V-8.4V
Operating Temperature
-10°- 45°
Charging Time
About 1.6h (Using 18W fast charger)
APP
Name
Feiyu SCORP
Required Operating System
iOS 9.0 or later
Android 6.0 or later
How To Control The Camera
While connecting gimbal and cameras with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatibility List for more).
Motor Power Auto Tune
Use motor auto tune button or choose Auto Tune in motor power settings on APP to tune the motor power automatically according to the camera you install. Auto Tune operation: Put gimbal on the table, start the motor power tuning progress through motor auto tune button or APP,and wait for the progress complete. Gimbal will vibrate slightly while Auto Tune to weigh the camera, it’s a normal Phenomenon.
Optional Accessories
Monopod (Pay attention to its max payload)?
Carbon Fiber Extension Rod?
Feiyu SCORP Focus Motor?
ARRI rosettes adaptor?
Portrait/landscape dual-use quick release plate?
Feiyu SCORP Image Transmission Transmitter?
wireless microphone kit? wireless microphone ( transmitter terminal )*1? wireless microphone (receiving terminal)*1?wireless clip-on microphone *1?
Body-mounted Weight Support for installing flash lamp/ soft light/ Microphone and other devices via cold shoes?
Available Functions For Users
1. Change follow modes via buttons, directly show the state of camera connection, Bluetooth , battery.
2. One tap to enter Auto rotation mode (Inception mode), VLOG Selfie and portrait shooting for TikTok, and more special shooting way.
3.Switch between portrait and landscape mode.
4. Control picture taking/recording with shutter button (see Camera Compatibility List for more). 5. Initialize the gimbal when it is not level.
6. Manually set up the shooting angle on tilt axis and pan axis by hand.
7. Upgrade the firmware , set up the parameter, remote control and customize some button functions on APP.
