Specification :
Tilt: 320° Roll: 320° Pan: 360°(rotatable)
PF, PTF, FPV, Lock Modes
For larger payload and more compatible camera kits
Transmit and view pictures on Feiyu SCORP APP
Sony, Canon, Panasonic, Nikon, Fujifilm, Sigma (specially designed for Sony A7 series)
Panorama, time-lapse, follow shot, inception mode, vertical shooting
2 handgrips for different angle shots with built-in standing feet
Mark 2 points of focus /zoom /positions for automatic adjust
Electronic follow focus for most compatible cameras or add-on follow focus
Max.30m remote (motion) control on gimbal /camera modes, customize buttons
Type-C port takes 1.6h to fully charge, 13h runtime, built-in 2500mAh li battery
Max. Payload: 2.5 kg/5.51 lbs
Self weight: 1.2 kg/2.65 lbs
Calibrates motor power after camera installed on gimbal via touchscreen or APP
Feiyu SCORP-C 3-Axis Handheld Gimbal for Camera
314.4*243.3*210.7 mm (balancing position)
280.8*266.2*71.3 mm (folded position)
About 1.2 kg/2.65 lbs (including quick release plate, not included other accessories and camera)
Synthetic macromolecular resin, Alumninum Alloys
About 2.5 kg/5.51 lbs (well balanced)
Splash-proof
3-axis Motor
Tilt:+110°~-45°
Roll:+20°~-20°
Pan:360°(Unlimited)
Tilt: 320°(With limitation)
Roll: 320°(With limitation)
Pan: 360°(Unlimited)
Pan follow, only the pan axis follows the hand movement
Pan and tilt follow, only the pan and tilt axes follow the hand movement
Pan, tilt and roll follow, all three axes follow the hand movement
All three axes do not follow the hand movement, the gimbal keeps the fixed direction of the camera
Flash follow, all three axes follow the hand movement at high speed
1/4 inch thread hole*1, which can mount Tripod; Below the multifunction knob: Type-C charging port*1;
Type-C extension port*2 to connect focus motors;
Type-C camera control port*1, Type-C image transmission port*1;
1/4 inch thread hole*1, for installation of lens holder;
1/4 inch thread hole*1, for installation of ARRI rosette adapter;
Lithium Cell
2500mAh, built-in battery cannot be removed, charge it via the USB-C port
13 hours
6.8V-8.4V
-10°- 45°
About 1.6 hours (Using 18W fast charger)
Feiyu SCORP
iOS 9.0 or later
Android 6.0 or later
While connecting the gimbal and your camera with cable (standard accessories for SONY, CANON, NIKON, Panasonic, etc.), users can control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatible List for more details).
Use Motor Auto Tune Button or choose Auto Tune in motor power settings on Feiyu SCORP APP to tune the motor power automatically according to the camera you install.
Auto Tune operation: Put gimbal on the table, start the motor power tuning progress through Motor Auto Tune Button or Feiyu SCORP APP, and wait for the progress complete.
*It's a normal phenomenon that gimbal will vibrate slightly while Auto Tune to weigh the camera.
1. Monopod (pay attention to its max payload)
2. 275mm Carbon Fiber Extension Pole
3. Feiyu SCORP Focus Motor
4. Arri Rosettes Expansion Accessory
5. Portrait Quick Release Plate
6. Feiyu SCORP Image Transmission Transmitter
7. Wireless Microphone Kit: wireless microphone ( transmitter terminal )*1 , wireless microphone (receiving terminal)*1 , wireless clip-on microphone *1
8. Body-mounted Weight Support for installing flash lamp/soft light/microphone and other devices via cold shoes
1. Change follow modes via buttons, directly show the status of camera connection, bluetooth, battery.
2. One tap to enter Auto-rotation mode (Inception mode), VLOG Selfie, Portrait Shooting for TikTok, and more special shooting ways.
3. Control picture taking/recording with shutter button.
4. Initialize the gimbal when it is not leveled.
5. Manually set up the shooting angle on tilt axis and pan axis.
6. Upgrade the firmware, set up the parameters, remote control and customize some button functions on Feiyu APP.
