Specification :
Pictures can appear very different and achieve various expressions depending on how you manipulate the light. But lighting a shot is not at all difficult with the SB-300 Speedlight. Its flash head can be set up to 120 degrees upward allowing you to bounce light off ceiling or wall to endow a softer, more natural look to your subject. You can easily control the lighting to capture a beautiful indoor portrait creatively.
With its compact and lightweight design, comfortable portability is ensured even when attached to a camera. The SB-300 is certain to expand your enjoyment of shooting pictures in a variety of scenes.
Attach the SB-300 to a camera supporting Nikon Creative Lighting System (CLS) or a COOLPIX model supporting i-TTL flash control, and switch the power on. This is all you have to do to enjoy flash photography. Thanks to Nikon's highly accurate i-TTL flash, the amount of light output is automatically and appropriately controlled, achieving high-quality flash shots reliably.
The SB-300 uses two AAA-size alkaline or NiMH batteries which are readily available anywhere, so you'll never run out of power.
Electronic construction | Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry | ||
---|---|---|---|
Guide number (20°C/68°F) | 18/59 (ISO 100, m/ft) | ||
Angle of coverage | Covers angle of view of 27 mm lens (FX format) or 18 mm lens (DX format) | ||
Effective flash range (i-TTL) | 0.6 m to 20 m (2 ft to 66 ft); varies with ISO sensitivity, bounce angle, and aperture | ||
Options available using camera controls |
| ||
Bounce angle | Flash rotates vertically up to 120° with stops where the flash is pointing directly ahead and at 60°, 75°, 90°, and 120° | ||
Device on/off | Power switch used to turn SB-300 on and off | ||
Power source | Two AAA alkaline or NiMH batteries | ||
Flash-ready light |
| ||
Flash duration | Lights for about 1/1650 s when fired at full power | ||
Batter endurance and flash recycling time*1 | Battery type | Minimum recycling time*2 | Endurance*3/recycling time*2 |
Alkaline | Approx. 4.0 s | 70 or more uses/4.0-30 s | |
NiMH | Approx. 3.5 s | 110 or more uses/3.5-30 s | |
Mounting foot lock lever | Locking pin prevents accidental detachment | ||
Other options | Thermal cut-out, firmware update*4 | ||
Dimensions (W x H x D) | Approx. 57.4 x 65.4 x 62.3 mm (2.3 x 2.6 x 2.5 in.) | ||
Weight |
| ||
Supplied accessories | Soft Case SS-DC1 |