Specification :
Protective Utility Frame
One frame for protection and multi-position expansion.
Strong protection, peace of mind.
Steel outside, silicone buffer inside. Bumps and drops stop at the frame.
* When tested at drop height of 1.5 meters, the accessory can enhance the camera's fall protection. Actual level of protection may vary depending on environment and usage habits.
Locks tight, comes off easy.
The latch stays firmly connected and still opens with gloves on.
More angles to shoot from.
A side 1/4" interface mounts the camera horizontally for new setups and framing.
Nothing gets blocked.
Battery compartment, USB-C port, and bottom magnetic contacts all stay usable, and the charging rainproof cover still fits. Swap batteries, charge, and connect gear with the frame on.
Ready for outdoors.
Mic Windshields and a Lens Cap come included, covering the conditions you'll actually shoot in.
Notes
- When mounting the camera, ensure that the buckle is securely locked.
- When there is no need for noise reduction, remove the Mic Winddshields from the Protective Utility Frame to prevent damage or loss.
- Do not use the Mic Windshields in wet conditions as dampness may affect wind noise reduction.
- Store the Mic Windshields in a dry environment to avoid any potential damage from moisture.
Weight:
63.2g (2.23oz)
Dimensions:
54×26×66mm (2.13×1.02×2.60in)
Materials:
Metal, silica gel
